Friday, December 24, 2010

Uconnect.wisc.edu/wellness

How to reduce and cut a zipper, detachable. The double

The other day we saw how to reduce a closure not separable from the bottom to the union, great place to ask for closures, those already in place or separable will decrease by up. The separable can not in any manner they, being changed by the above, the separation of accessories to my knowledge are not and have never been available supplies.
http://tictac-cordonnier.blogspot.com/2010/10/comment-diminuer-et-couper-une.html

Today a zip change on a motorcycle jacket:
http://tictac-cordonnier.blogspot.com/2010/03/changement-dune-fermeture-glissiere-sur.html

The accurate measurement does not exist in industry, or we are temporarily out of stock.


The Jacket.



closure, the original nylon is too thin and fragile for this jacket quality, heavy, always reserved for intensive use in the motorcycle. It will be advantageously replaced by a brass mesh to much bigger and strong. There is of course always be careful and use " maintains it "for a longer life:
http://tictac-cordonnier.blogspot.com/2009/10/pour-la-longevite-des-fermetures.html



We trace the money pen the exact location of the cut.





was removed to the cutter straight retainers.




retainers removed.





Cut to the cutter each mesh with great care not to cut the frame.



All stitches are removed.



It tightens the straps,



closure is ready to cut the frame.



must crimp the lugs enough so that at the closing they can go under the truck to perform their roles effectively, but they are not visible above, but not too much for their use is unnecessary and that the truck passes over it.



the frame is cut to scissors.


closure is almost ready for installation.



This requires last, burn the frame at its ends.
Very friendly,
Tictac

Thursday, December 16, 2010

Magic Blue Flying Deck

. English in the so-called double-stitched Baraquette. These shoes



method of mounting Goodyear in Baraquette sewn, double leather This tail until only sole, sewn into small points at the same time as the sole wear.
Another example that shows that manufacturers are doing what they want, as they wish

Historically, sewn Baraquette " imposes " a double entire coast to heel.
Yet with these shoes, big brand, high quality manufacturing, more than thirty years, double the is present only until tail sole manufacturer skirting the ethics of production.




method of mounting Norwegian in Baraquette sewn, double complete end-to-heel rubber sewn into small points with the welt, the tread is welded only on double.




method of mounting goodyear sewn in Baraquette, double rubber sole sewn dots along the outsole, welt "Y "is reminiscent of a method of mounting Norwegian . Some shoes
" walking, sport, countryside " carry one or two double , (I do I never saw three) for me it is not an old name, we always talk about being a "double " us at the workshop.

When double tail is present up footing only, it is simple, I've never seen two.
lovers speak of double or triple sole, for me it is an appellation erroneous the term thickness is more appropriate, and may agree rigor. With the designation of soles, some users think that increases the resistance and we can use all these thicknesses that are only double that in no case be affected by wear. Their utility is aesthetic for those who love. They are reserved walking shoes, athletic, country, etc. ... for the "comfort " insulation , requirement of two double necessary with sidewalk or "staircase in prowess and fantasy.
It also takes the names of two of double sole , of interlayer English, mid sole, it must certainly have its translation into all languages.

It may be different materials, leather, rubber, some manufacturers in their production mediocre low-end, do not hesitate to put his or salpa sudaccés. Double rubber are almost always present when they are sewn into small dots, with the rand, the tread rubber sole complete Commando etc ... These kind of leather in the manufacture of leather. Yet "all" Camarguaise, the method of mounting beads, see their soles wear leather, welded only on doubles rubber dots sewn with beads. http://tictac-cordonnier.blogspot.com/2009/10/autre-montage-le-chapelet-ou-cousu.html

For the pancake is a little different,
http : / / tictac-cordonnier.blogspot.com/2009/11/le-crepe-veritable-posologie-et-mode.html
as this matter requires that automatically "double " glued and sewn on the front thickness for receiving the crepe outsole, only welded itself to " hot " by scouring the bench finishing.

For the assembly process Sandal,
http://tictac-cordonnier.blogspot.com/2009/10/autre-montage-le-sandalette.html
the amateur view of the boom can think a double then it's just the first mounting outside overflowing necessary to sew little point in manufacture.

It can be of different thickness according to the manufacturer's desires or those of the artisan according to customer's requests.
can not meet me for not double in less than 2 mm and above 6 mm thick, for me the most commonly encountered thicknesses are 2.5, 3, 3.5 mm.
these thicknesses are often thinner rubber (exactly interbeds and similar materials) 4 mm and more leather.

For location, it can be :
Present in the assembly process Goodyear, rosary, Norwegian , sandal, etc. ... end of shank sole, end of heel.

necessarily Presents:
sewn in Baraquette, over the entire surface from end to heel.
http://tictac-cordonnier.blogspot.com/2010/04/le-cousu-baraquette.html

In Goodyear, goodglake , etc. ...
Until tail sole, thinner, in both cases, I do not know and see only those, set by all the means described below.
Whatever its means of fasteners, it is sandwiched between and welt outsole. Except goodblake or she is sewn to serve blake welt.
attention will double if arrested the bottom of sole at the sole assembly for repair, to descend further, the tread camber. Indeed the same location would cause termination of trouble fast walking, place of tension and pliement.
The description of the different method of attachment for the double are tedious and technical a little barbarous for the amateur, only a small minority are in search of what kinds of information, but they are required to professional. Indeed
during repairs, it is necessary for craftsman understand the processes of fixtures, the modes fasteners, for description, information, advice to clients and the cost of the operation. And for himself how to grasp the job.
I said before, surprises are always in the same direction " bad" for all professional craft.

Whichever mounting method:
Goodyear welt in Transition, Norwegian, rosary, goodblake, or double is present or required.
It can be mounted in different ways:
Glued and sewn: Between
welt and outsole, the three layers sewn small point.
glued and sewn :
With the welt, the tread, only welded to the double . Glued and sewn
: Between
welt and outsole, the five layers (with the first assembly and the stem) blake sewn. Glued and sewn
:
In Blake, the outsole only welded to the double . Glued and sewn
:
In Blake, the outsole sewn blake.
Glued and sewn : In
overflowing with blake and serving as welt sewing the little point in keeping the tread. In the assembly process is called rapid blake and me goodblake.
Glued and sewn :
small welt on the point and serve as a "welt " for sewing the second little point in keeping the tread in the so-called fantasy sidewalk or the stairs , I speak for the topic " the sidewalk or the stairs "
pegged wood :
I speak for the topic" alternative method of installation, wood pegged "outsole welded to the double or also pegged wood.
nailed :
On the insole with the outsole.
nailed :
On the insole, the outsole welded to the double .


I hope I have done a round rather complete, as I always forget that we want to forgive me.

Very friendly,
tictac the needy

Thursday, December 9, 2010

Poptropica Free Credits Cheat

pucker. After the hair dryer, hair spray.

Hello,

In other climes, I had made a subject " rigid boots cavalier " The message deleted, I think I kept any pictures. will certainly represent an opportunity.
In this example it was the wand back and forth between it and the rod I had slipped a thin steel Lama. The first and second picture of this subject shows the location of the transformation:
http://tictac-cordonnier.blogspot.com/2009/09/de-la-reparation-en-ameublement-canape.html

There are several locations, materials and a thousand ways do ( Brides, buckles, elastic ... etc) to stiffen boots or shoes to keep, high in parts of the bridle) An article will appear "too big Shoes poses on the flanges délastiques back " which is valid in many instances.
fashion with some models of boots, boots, bridle instead of rigidity, particularly requests that these shoes wrinkle at the ankle on the foot.
Unlike others, often flexible Suede, strecth, velvet, suede, why this is not a vocation, sag and fall to the foot. Besides the solutions described before, which repairs or alterations sometimes expensive. There are as dry hair:
http://tictac-cordonnier.blogspot.com/2010/11/le-seche-cheveux.html

something, there are hairdressers again off property, " lacquer.
This product is by no means a cleaning product for skins, it's just a trick, an alternative for repairs considered too expensive, or according to mounting an impossibility. Rather than throw the shoes as well try this product. If I mentioned to my clients, I do not practice.
you to play, as the boldest lift a finger.
Very friendly,
Tictac

Sunday, December 5, 2010

Lafayette Colorado Cb

shoes too small, painful feet, cut the cord.

Hello,

This morning at the workshop shoes too small, more precisely shoes that cause pain when walking.
Fashion is partly responsible, the latter for women's shoes, elongated shapes (which promotes a very rapid wear of the ends), cutting of the upper very pronounced until the birth of little toes , or discovering (Aesthetics, although it is a matter of taste, detrimental to the comfort, pro pain, and tears) to force
shape and wonderful products and dilatant conformers, I talk about it here: http://

tictac-cordonnier.blogspot.com/2009/10/chaussures-trop-petites-neuves-pieds.html

Fail to come to the end, indeed a the aThis nylon support limit Rod, I talk about it here:

http://tictac-cordonnier.blogspot.com/2009/08/la-question-posee-dans-une-autre.html

is present around the stem. Its presence in course useful, but in extreme cases, a single solution, the cut.
careful layout without expanding, if lacetti will not grow, leather He will tear.



The cut stem is very steep compared to old ways may be less aesthetic, but more comfortable.




It rips the lining of the rod with all cutting tools, "knife, seam quickly, cutter, knife, etc. ..." with great care to household access to the cord.




Both rambling shoes. For me the best place is on the inside.



is discarded with a small tool, lining and uppers.



is off the back of the rod to get the nylon reinforcement. It is sometimes very difficult to find and remove. (Without reference) must take great care to avoid damaging the shoes almost always new.



We leave "the lacetti "



were cut.


Both prepared boots.



It glues together the return of the stem, then this one and the lining.



We put these little clips for the wonderful preparation and maintenance work.



drying time required, are applied and hammered with kindness.



move to the sewing machine and voila. are only delivered to the client, we hope to his satisfaction, our primary concern.
Very friendly,
Tictac the needy.